What Are The Precautions For Using The Hose?

Precautions for the use of Hydraulic Hose Due to the complexity of the types of hoses, the diverse structures, and the different conditions of use, the service life of the hose is not only determined by the quality, but also by the correct use and maintenance. Therefore, even if the product has extremely high quality, if it cannot be used and maintained correctly, it will seriously affect its use quality and life span, and even cause serious accidents that should not occur, causing damage to property. Hydraulic Rubber Hose Manufacturers now provide the following points of attention:

Hydraulic Rubber Hose

1. The hose and hose assembly can only be used to transport the designed material, otherwise it will reduce the service life or fail.

2. Use the length of the hose correctly. The length of the hose changes under high pressure (-4%-+2%) and the length change caused by mechanical movement.

3. The hose and hose assembly should not be used under pressure (including shock pressure) exceeding the design working pressure.

4. Under normal conditions, the temperature of the medium conveyed by the hose and hose assembly should not exceed -40℃-+120℃, otherwise the service life will be reduced.

5. The hose and hose assembly should not be used under the minimum bending radius of the hose, avoid bending or bending near the pipe joint, otherwise it will hinder the hydraulic transmission and conveying materials or damage the hose assembly.

6. The hose and hose assembly should not be used in a twisted state.

7. The hose and hose assembly should be handled carefully, and should not be dragged on sharp and rough surfaces, and should not be bent or flattened.

8. The hose and hose assembly should be kept clean, and the inside should be flushed (especially the acid pipe, spray pipe, mortar pipe). Prevent foreign objects from entering the lumen, obstructing fluid delivery and damaging equipment.

9. The hose and hose assembly beyond the service period or storage period must be tested and identified before they can be used.