• Hengshui Huiya
  • Rotary Drilling Hose
  • High Pressure Hose
  • Low Pressure Hose
Home / Products / Fuel Transfer Hose
  • fuel-transfer-hose-main.jpg
  • fuel-transfer-hose-nbr-inner.jpg
  • fuel-transfer-hose-flexible-bend.jpg
  • fuel-transfer-hose-agricultural-use.jpg
  • fuel-transfer-hose-size-options.jpg
  • fuel-transfer-hose-detail.jpg

Aircraft Refuel Hose – Textile Reinforced, API 1529 & EI 1529 Aviation Fuelling Hose

This API 1529 / EI 1529 aircraft refuel hose is for aviation refuelling/defuelling. It has NBR kerosene-resistant liner, 0.15 bar vacuum textile reinforcement and static-dissipative, weather/abrasion resistant cover. All assemblies are tested, traceable and supplied with COC.

Product parameters

ParameterSpecification
StandardAPI 1529 / applicable EI 1529 requirements
Inside diameter (ID)2.5 in (63.5 mm); other bores on request
Outside diameter (OD)3 in (76.2 mm)
Standard length75 ft (22.86 m); other lengths on request
Inner tubeKerosene-resistant black NBR rubber
ReinforcementHigh-tenacity synthetic textile braid
CoverBlack, oil and weather resistant, semi-conductive rubber
Maximum vacuum0.15 bar
Working pressure / burst pressurePer size, stated in the technical datasheet
Temperature rangePer compound, stated in the technical datasheet
Electrical propertiesSemi-conductive cover; assembly continuity verified by test
End fittingsCrimped permanent fittings or reusable couplings, with aluminium safety clamps
MarkingManufacturer, standard reference, size, quarter and year, serial number

Product Features

· Conforms to API 1529 and applicable EI 1529 requirements — meets the specification named in airport fuel tenders, which shortens technical approval

· Semi-conductive black cover — conducts static charge away from the fuel flow and reduces the ignition risk of fuel transfer

· Kerosene-resistant NBR inner tube — no swelling and no fuel contamination, protecting filters and aircraft fuel systems

· Textile braid reinforcement — lighter and more flexible than wire braid of the same bore, easier to handle on a reel

· Maximum vacuum 0.15 bar — resists collapse during defuelling and drain-down instead of kinking at the pump inlet

· Oil, weather and abrasion resistant cover — longer service life on open apron surfaces and lower replacement cost

· Pressure and continuity tested, serial numbered — each hose arrives with evidence of conformity, ready for the operator audit file


Scope of application

· Conforms to API 1529 and applicable EI 1529 requirements — meets the specification named in airport fuel tenders, which shortens technical approval

· Semi-conductive black cover — conducts static charge away from the fuel flow and reduces the ignition risk of fuel transfer

· Kerosene-resistant NBR inner tube — no swelling and no fuel contamination, protecting filters and aircraft fuel systems

· Textile braid reinforcement — lighter and more flexible than wire braid of the same bore, easier to handle on a reel

· Maximum vacuum 0.15 bar — resists collapse during defuelling and drain-down instead of kinking at the pump inlet

· Oil, weather and abrasion resistant cover — longer service life on open apron surfaces and lower replacement cost

· Pressure and continuity tested, serial numbered — each hose arrives with evidence of conformity, ready for the operator audit file


For more information, please contact us: 

Email: support@huiyahose.com

WhatsApp / WeChat: +8615610925977


Related Products

Contact Us
  • Tel. : +86 318 2883 888
  • Mob : +86 139 3183 6368
  • E-mail : manager@huiyahose.com
  • Wechat : +86 13931822727
  • WhatsApp : +86 13931836368
  • Viber : +86 139 3183 6368
  • Add. : East Development Zone, Jingxian County Hengshui City, Hebei Pr. China